Clipsal C-Bus Manuál s instrukcemi stáhnout pdf (Strana 139)

1250SM0904R10/09 C-Bus™ Basic Programming

10/2009 C-Bus™ Products Training Course

DLTs

DLT stands for dynamic labelling technology. The basic principles of

programming a DLT are identical to those of a Neo or Saturn switch. The

main difference between programming a Neo and a DLT is the labels.

To begin programming a DLT, double click on the unit in the Database or

Network section of the Programming window. This will open the GUI of the

DLT.

Figure 120 - Simple programming view of the DLT GUI

You will notice at a first glance, that the DLT only displays 4 buttons. On a

closer inspection, you will see that there are two tabs which resemble the 2

pages of the DLT:

 Tab 1 allows the programming of Buttons 1 to 4.

 Tab 2 allows the programming of Buttons 5 to 8.

The group addresses and key functions are programmed as normal.

However there are two different types of labels:

 dynamic

 static.

Dynamic labels allow the labels to be changed (at any time), by C-Bus

Toolkit, a touch screen or Multi Room Audio system.

Once a static label is programmed and saved into a DLT, you lock out the

ability to save new labels to the DLT. This can be done by changing the

existing label from dynamic to static. Once you save changes, the DLT will

not respond to software and hardware that tries to change its labels.

NOTE: Typically you will not need to use static labels, as almost all C-Bus

installations use dynamic labelling.

Once you have programmed a group address into a key/button you will see

that the group address tag is automatically written to the label for the

associated key/button.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 147 148

Žádné komentáře

Clipsal C-Bus Manuál s instrukcemi Strana 139