Clipsal C-Bus Specifikace Strana 37

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 64
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 36
37
1B. C-Bus Concepts
1.4 Single Network Topology
All C-Bus units may be wired in star, daisy chain or a combination of both configurations. A closed
ring configuration must not be used. Wiring the C-Bus network in this configuration will cause erratic
behaviour.
Daisy Chain
The daisy chain wiring configuration (shown in Figure 4), is basically a run of units, connected with its
positive and negative terminals in parallel.
Figure 4 – A daisy chain configuration
Star
Figure 5 shows some input units wired in a star configuration. This is basically a run of units,
connected with multiple wires coming into the positive and negative terminals in parallel.
If two or more cable runs branch off from a single point, it is referred to as a star configuration.
Figure 5 – A star configuration
Zobrazit stránku 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

Komentáře k této Příručce

Žádné komentáře