Clipsal C-Bus2 Instalační manuál stáhnout pdf (Strana 5)

Intelligent Building Series C-Bus Infrared Transmitter Installation Instructions

3.3 Connection to the C-Bus Network

Installation requires connection to the unshielded twisted pair C-Bus Network

Cable. The illustration below shows the recommended technique for cable

termination giving the best electrical performance. It is required that Category 5

data cable is used, Clipsal catalogue number 5005C305B. The C-Bus Network

connection is polarity sensitive, and is clearly marked on the rear of the Unit.

C-Bus Connection Colour 5034NIRT

Remote ON Green/White Not Connected

Remote ON Green Not Connected

C-Bus Neg (-) Orange/White C-Bus Neg (-)

C-Bus Pos (+) Blue C-Bus Pos (+)

C-Bus Neg (-) Blue/White C-Bus Neg (-)

C-Bus Pos (+) Orange C-Bus Pos (+)

Remote OFF Brown/White Not Connected

Remote OFF Brown Not Connected

* Note: The 5034NIRT does not have Remote Override (On/Off) functions,

however these connections must be maintained for correct operation of these

services across the C-Bus Network.

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Clipsal C-Bus2 Instalační manuál Strana 5